Guest Designing for CropStop – Cards from Spellbinders Cut, Fold & Tuck dies

Good Morning! I am happy to announce that I’m guest designing for the CropStop blog again today. If you’re coming here from the CropStop Blog – Welcome! (You’ll probably want to skip down in this post to after the *** break.) Some comments from last week mentioned how difficult DIY flowers were. Well, this wee’s cards are MUCH easier. Although they may look complicated, Spellbinders Cut, Fold & Tuck dies do most of the work for you. Here’s a TINY sneak peek at what you’ll see over at the CropStop Blog. I know you’ll want to go see it full sized over there!

Please take a moment to go ahead over to the CropStop blog, check out both of the projects and leave some love, ok?! When you’re done, come on back here for the extra little details I always include. Click HERE to go there… I’ll patiently twiddle my thumbs while you’re away…

***     ***     ***     ***

I thought you’d like to see how I dealt with an ‘oops’… For the first card, I embossed some chalkboard cardstock, but it cracked in some places. Hence the diagonal cut to eliminate the damaged areas.

The Sand-It gadget brought out even more of the white core which made the embossing look ‘chalked’ onto the background. Then I used the Octagon strip like a lace corset to ‘hold’ the two pieces together. The Octagon Strips & Accents Cut, Fold & Tuck dies work great with double sided paper. Sometimes, for prints, you just have to plan a little bit to get the part you want to show (like the hearts). I  even used it on the lined envelope to make it match. (See the big pics over on the CropStop Blog, or smaller pics at the end of this post.)

For the triangle shaped card, I used Spellbinders Star Dreams. Since I didn’t have black & gold double-sided cardstock, I made my own by cutting the black and then cutting the gold and gluing them together. FYI: I tried this previously putting them together first with Scor-tape, but found it was too thick to cut through all the layers, in spite of using a metal cutting plate.

Side note: the diamonds that fall out are worth saving for making boxes for another project:

I also cut two extra solid triangles to make the back so it would stand alone.

By making them meet in the middle, it makes a nice stand and folds flat for shipping.



So, there you have the few extra little details. Thanks so much for visiting both blogs today!  You will find the list of all the supplies used on the CropStop Blog. You can click HERE to go back and check it out again.

Thank you, CropStop, for the privilege of guest designing for your blog twice this month!

Before I go, let me remind you that today is also the first day of the Spring Coffee Lovers Hop, and, as soon as it goes live, I hope to post some cards and EDIBLE stamping for you, so be sure to check back!



p.s. any ads on this page are placed by WordPress and are not endorsed by me.

Guest Designing for CropStop – Heartfelt Creations Daffodils-from-Orchids Card

Hooray! Today is the day I finally get to share with you the exciting secret I’ve been busting to tell you… I was invited to be a guest designer of a project for the CropStop blog! If you happen to be coming from there… WELCOME!!

I was totally surprised and nervous as all get-out for my first ever privilege of being a guest designer! I hope you like my first project… I happen to think it’s one of my best cards. I’d be tickled pink if you would pop over to the CropStop blog and leave some love! Here’s a TINY sneaky peak to pique your interest:

I know you’re going to want to see the details close up… you can click the link HERE to get to the CropStop Blog. Meanwhile, I’ll sit here and twiddle my thumbs while you go check it out!  When you’re done, please come on back here and I’ll share some extra details and tips with you, ok?!

Are you still here? I wish I knew how to embed music into my post, but since I dont, let me send you on your way by humming the theme from 2001: A Space Odyssey for dramatic effect while you click on the link HERE to go check out the project…. duuuum, DuuuuuM, DUUUUUUMMMM, TaDUUUMMM!….

* * * * * * * * * * * * * * * * * * * * *

So, what’d’ya think?! I hope you liked it as much as I did! Of course you know things always look better in real life… wish you could see it for real!

Here’s some of the extra details that I didn’t want to overwhelm the folks at the CropStop blog. I played around with different ways to color the flowers… The first ones I stamped with Versamark ink and then watercolored with Distress inks by putting the ink on some plastic and picking it up with a water brush.

Note: For those of you who don’t have a MISTI or other stamping device, I highly recommend using the red 11×17 Rubber Stamping Mat under your paper to help get a nice evenly stamped image.

Also, if you don’t have a palette made specifically for watercoloring, you can use any hard plastic, like an old cd, a cd cover, or the packaging from your stamps, like I did.

You can see I wasn’t worried about staying in the lines as the die would cut away the excess. I did want to go OVER the lines to get a little extra dark coloring where the Versamark stamped image was.

For the second set of flowers I colored directly with the markers.

And, for the final set of flowers, I stamped with a light gray ink instead of Versamark and colored directly with the markers again. I also colored the back sides of each flower.

These are the Heartfelt Creations Botanical ORCHID stamps. Emma Lou of Heartfelt Creations has a nice video showing how to use these to make the DAFFODILS HERE.

Here are the finished flowers in the order I made them:

If you want a softer color, the watercolor works, but for brighter colors, coloring direct on the page works better. You will loose some color with the wetting required to shape the flowers. (Note, I also tried this with Color Bursts, but they washed out too much. FYI, you would have to start out with a really dark color to allow for the loss of color in the wetting and shaping process.)

I used the Twist & Style Sizzix so kindly sent me a while back to make the stamens out of beads and wire stems. It makes quick work of wire twisting!!

Another thing I learned… The Beadalon 7 strand .015″ wire was a little too flimsy for the stems. The 26 gauge copper wire worked MUCH better. If I wanted them to stand up in a bouquet, I’d use an even heavier wire.

Here’s a close-up of the finished flowers. I took one of each different kind and put them in a bunch for variety and affixed them with Glubers.  Oh, and FYI, the butterfly got its fabulous shine from Stickles (Firefly and Tropical Tangerine).

For the card base I wanted to have it embossed with the Couture Creations Serenity Collection: Chiaro 5×7 embossing folder that I won from CropStop back in January AND I wanted a nice cutout shape. This led to another learning experience…

The die cut card was so delicate that the pass through the embossing machine ‘broke’ the paper apart in several places. It worked out much better to run the paper through the embossing folder first, THEN die cut it. In the process of die cutting it, it did flatten some of the embossing, leaving a much softer look and keeping the edges in tact.

Tip: Can’t find faux adhesive pearls to match your project? Use a Copic Marker to color plain ones!

You will find the list of all the supplies used on the CropStop Blog. You can click HERE to go back and check it out again. Thank you, CropStop, for the privilege of guest designing for your blog!

Well, as Paul Harvey used to say, “And now you know the REST OF THE STORY!”

I am also playing along with the following challenges… click on any one of them for more information on how you can join the fun:

You can also feel free to join in with the Cropstop March Challenge Linky Party #26: Anything Goes… It’s always fun to see the many lovely projects and you have the chance to win a nice prize or, perhaps, even be a guest designer!

Please stop back by Next Friday, March 24, for another guest designer post for the CropStop blog… this time a MUCH simpler pair of cards using some fun cut-and-fold dies… I’ll look forward to seeing you then!

This has been D.Ann reporting…. “Good day!” : )


p.s. any ads on this page are placed by WordPress and are not endorsed by me.